chown33
Apr 11, 12:09 AM
Without looking at the code, the error message should tell you what's wrong. I've hilited the significant part in bold:
2011-04-10 22:49:45.657 ForoTest[219:207] -[UIViewController showNextView]: unrecognized selector sent to instance 0x4b38630
2011-04-10 22:49:45.735 ForoTest[219:207] *** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '-[UIViewController showNextView]: unrecognized selector sent to instance 0x4b38630'
It's sending a showNextView message to a UIViewController instance.
Your first post said the method was in your app delegate, not a UIViewController, so check your source first. When I look at the source, I see showNextView in ForoTestViewController, not the app delegate like you said.
I also advise you to check your classes in the nib, to make sure a ForoTestViewController is being instantiated.
It's unclear how you made the non-working Xcode 4 project. If you started with the known-working project, then you probably just broke a connection or misconnected something. If you recreated it entirely from scratch, then there's no easy way of knowing what mistakes you might have made. I'm pretty sure Xcode 4 can open Xcode 3 projects, so I don't know why you'd want to start over.
2011-04-10 22:49:45.657 ForoTest[219:207] -[UIViewController showNextView]: unrecognized selector sent to instance 0x4b38630
2011-04-10 22:49:45.735 ForoTest[219:207] *** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '-[UIViewController showNextView]: unrecognized selector sent to instance 0x4b38630'
It's sending a showNextView message to a UIViewController instance.
Your first post said the method was in your app delegate, not a UIViewController, so check your source first. When I look at the source, I see showNextView in ForoTestViewController, not the app delegate like you said.
I also advise you to check your classes in the nib, to make sure a ForoTestViewController is being instantiated.
It's unclear how you made the non-working Xcode 4 project. If you started with the known-working project, then you probably just broke a connection or misconnected something. If you recreated it entirely from scratch, then there's no easy way of knowing what mistakes you might have made. I'm pretty sure Xcode 4 can open Xcode 3 projects, so I don't know why you'd want to start over.
awmazz
Aug 26, 04:24 PM
I imagine the situation in Australia is that the independents and Greens will be wooed - until the very first opportunity to dump them occurs, at which point they'll be discarded posthaste.
Yep, they usually do that here too, but this time around sufficient number of voters didn't want either of them enough to hold their nose and vote for the other one. Usually if there's someone you can't vote for you can always find someone to vote against. This election also had the highest number of 'informal' nobody at all votes for three decades I think.
Haha, going on what I said previously about them granting the Independents' wishes, the political cartoons are reflecting this - one has an independent asking "can I have a pony?". Another one is asking for a rocketship to send one of his cows over the Moon and the big party leaders are nodding in agreement, yep, we can give you that... :)
Yep, they usually do that here too, but this time around sufficient number of voters didn't want either of them enough to hold their nose and vote for the other one. Usually if there's someone you can't vote for you can always find someone to vote against. This election also had the highest number of 'informal' nobody at all votes for three decades I think.
Haha, going on what I said previously about them granting the Independents' wishes, the political cartoons are reflecting this - one has an independent asking "can I have a pony?". Another one is asking for a rocketship to send one of his cows over the Moon and the big party leaders are nodding in agreement, yep, we can give you that... :)
jusacruiser
Apr 26, 04:35 PM
Is there any reason you can't figure out how to use copy paste from the screenshot within preview?
No, I guess not. I could probably do copy and paste. I was trying to use the screen shot feature instead to see how it works.
No, I guess not. I could probably do copy and paste. I was trying to use the screen shot feature instead to see how it works.
level1kid
Mar 13, 06:40 PM
you could try:
div.searchdiv{
height:100%;
}
but i have never tried that before (also 100% is relative to the container aka a div)
div.searchdiv{
height:100%;
}
but i have never tried that before (also 100% is relative to the container aka a div)
more...
QCassidy352
Dec 5, 11:20 AM
I'm with the others here. Spymac has really lost it, big time! I don't even have it bookmarked anymore. I hope MR never turns the same way...
w8ing4intelmacs
Feb 29, 04:46 PM
i'll take the flawed one. im sending money now
more...
Curse
Apr 28, 08:15 PM
It is Power PC G4.
Did 'safe' mode restart and still same problem - just the display icon and date stamp in corner. When I try to shut down it won't let me and says that 'Finder' quit the restart.
Found copy of Tiger but the previous owner said it never worked properly.
Did 'safe' mode restart and still same problem - just the display icon and date stamp in corner. When I try to shut down it won't let me and says that 'Finder' quit the restart.
Found copy of Tiger but the previous owner said it never worked properly.
DakotaGuy
Apr 22, 02:03 PM
Anyone planning to break a contract and pay full retail price for the white one?
more...
blevins321
Apr 20, 10:02 AM
BLAAAAA!!!
So I cant do it with a DVD at all? WTH? Seems very inconvenient to need the special USB install media.
This is just a thought, but maybe you could take one of your own flash drives into an Apple Store? They might be willing to clone one of the USB drives for you, or maybe even replace it for a small fee.
So I cant do it with a DVD at all? WTH? Seems very inconvenient to need the special USB install media.
This is just a thought, but maybe you could take one of your own flash drives into an Apple Store? They might be willing to clone one of the USB drives for you, or maybe even replace it for a small fee.
dgitalchaos
May 6, 12:06 AM
If you're good with your hands and taking things apart, then this will be a VERY easy task. I didn't have problems with heating, as my 15 MacBook Pro shipped with 10.6.7 (heating issues resolved?), but my curiosity got the best of me so I took mine apart... the thermal paste was horrible. I cleaned up the old thermal paste and had my GPU and CPU shining before I applied the OCZ Freeze, which dropped my already cool temperatures even more.
Normal temps are now 110 Fahrenheit (42 Celsius).
I used an acid brush with some rubbing alcohol to make sure that I didn't break the resistors on the GPU.
If you decide to take on the task, good luck AND make sure to disconnect the battery.
Normal temps are now 110 Fahrenheit (42 Celsius).
I used an acid brush with some rubbing alcohol to make sure that I didn't break the resistors on the GPU.
If you decide to take on the task, good luck AND make sure to disconnect the battery.
more...
blackcatgifts
Apr 11, 08:57 AM
Its obvious there are some problems with rapid weaver can anyone suggest anything else that would be suitable please for what I'm looking for.
What about sandvox? Would that be any better or worse than rapid weaver
What about sandvox? Would that be any better or worse than rapid weaver
MacFan25
Jun 24, 06:42 PM
I'm glad to hear that you are liking your iBook. You will probably get used to the keyboard soon. :)
more...
SB123
Apr 18, 09:25 PM
Its a nice shot but i don't really get a sense of scale, i don't get the feeling for how big the mountain is.
What could I have done differently to achieve better scale?
What could I have done differently to achieve better scale?
miles01110
May 5, 04:55 PM
That's interesting. The way I understand it is that I can buy my Mac somewhere else and then go to Apple within 14 days to buy the 1to1. Am I understanding that correctly?
No, because it only applies to Macs bought at one of the listed locations.
No, because it only applies to Macs bought at one of the listed locations.
more...
galimk
Apr 23, 05:30 PM
Look in your book for exactly what you're supposed to use for #import. You may have made a mistake.
I'm not sure, but #import <Fraction.h> seems wrong to me. If Fraction.h were a system-provided class, it would be correct. But it's a developer-created class, so #import "Fraction.h" seems more sensible to me, and is what I've always used when referring to class headers I create.
Post your code.
No one with any programming experience would believe anyone (beginner or experienced) who says there are no compilation errors, unless the code has actually been compiled without errors. You may be right, but we need to see the evidence of the compiler.
Thanks! Your answer helped. So now I know that <**> are only for system provided classes. I used quotes for Fraction.h and it worked.
The example that I used had everything dumped in the main .m file along with the main function.
I'm not sure, but #import <Fraction.h> seems wrong to me. If Fraction.h were a system-provided class, it would be correct. But it's a developer-created class, so #import "Fraction.h" seems more sensible to me, and is what I've always used when referring to class headers I create.
Post your code.
No one with any programming experience would believe anyone (beginner or experienced) who says there are no compilation errors, unless the code has actually been compiled without errors. You may be right, but we need to see the evidence of the compiler.
Thanks! Your answer helped. So now I know that <**> are only for system provided classes. I used quotes for Fraction.h and it worked.
The example that I used had everything dumped in the main .m file along with the main function.
Intell
Feb 21, 11:26 PM
Its still here. But you need to have a minimum number of posts before you can post or view it. I think the minimum is 250 or 500 posts.
more...
Espionage32
May 24, 11:39 PM
this is a great idea!!
Dreadnought
Nov 5, 04:48 AM
Interesting, very interesting! Let's hope they also will bring out a version for the G5's. Also the folding on GPU's is coming quite well. Let's hope our electric bills don't go up when you have a dual/quad folding and two X1900 in SLI mode! :D
BTW Macaholic, how did you get sooooo much folding power?!? And are you folding for Team MR?!?
BTW Macaholic, how did you get sooooo much folding power?!? And are you folding for Team MR?!?
belvdr
Sep 26, 03:37 PM
I always recommend learning any language by hand and use your favorite editor, such as TacoEdit, BBEdit, vi, Textpad, jEdit, whatever. Then when you fully understand it, you can use a WYSIWIG editor. Then you'll be able to modify the code for efficiency or just plain modifications.
Mik3F
Mar 21, 06:20 PM
As a VM under VMware Fusion
ohla313
Dec 8, 11:30 PM
its the stock photo from the iphone 4 library. like this: http://i248.photobucket.com/albums/gg175/modernage013/photo-4.png
Artful Dodger
Mar 1, 10:22 AM
Hello, if you look at my other post on the LaCie there is some info that I got from LaCie and some cd/dvd manfs. about the type of disc you need.
The burner won't be out untill mid March and as LaCie's web page says they are taking pre-orders.
Quote:
kwajaln
Artful Dodger, I had planned on buying one of the LaCie lightscribe external burners in the near future, but you mentioned something that caught my attention. Are there only certain blanks that are compatible with the lightscribe capability? I *assumed* any blank without a surfce design would have done the trick, but I guess not. Thanks!
Yes only certain media will work, TDK, HP (it's their drive in it), Verbatim and only the "+" R media since none of the companies are making any other media as of yet. This was from about 3 or 4 e-mails to different companies that were given to me by LaCie. Also the discs are of a gray scale "etched" quality when burned.
You will have to look for the Lightscribe logo on the side of the dvd/cd cake packs or what ever they pack them in.
Hope this helps.
The burner won't be out untill mid March and as LaCie's web page says they are taking pre-orders.
Quote:
kwajaln
Artful Dodger, I had planned on buying one of the LaCie lightscribe external burners in the near future, but you mentioned something that caught my attention. Are there only certain blanks that are compatible with the lightscribe capability? I *assumed* any blank without a surfce design would have done the trick, but I guess not. Thanks!
Yes only certain media will work, TDK, HP (it's their drive in it), Verbatim and only the "+" R media since none of the companies are making any other media as of yet. This was from about 3 or 4 e-mails to different companies that were given to me by LaCie. Also the discs are of a gray scale "etched" quality when burned.
You will have to look for the Lightscribe logo on the side of the dvd/cd cake packs or what ever they pack them in.
Hope this helps.
Jman14
Jun 24, 06:53 PM
i dont see his
johnnybluejeans
Oct 24, 11:30 AM
see you all at KOP. Ill be the kid wearing the skinny jeans and thick rimmed glasses, im kind of hard to miss (im a guy BTW). Say your from Macrumors, and we'll talk!
LOL
LOL
No comments:
Post a Comment