snathan
06-16 10:48 PM
This is a really good initiative. I appreciate the IV core for taking this up. I have read enough stories from people on Murthy forums. I will ask people on those forums to post their stories first hand on IV forums.
If possible contact other forum moderators and post this message/link. We need more support to fix this issue.
Thanks for your support.
If possible contact other forum moderators and post this message/link. We need more support to fix this issue.
Thanks for your support.
wallpaper Eva Longoria Parker in
kishdam
02-16 09:14 AM
Hi,
I am talking to different lawyers for using AC21 - new position title and functions are almost similar with similar salaries in the same region, old employer might revoke the approved I140 but 180 days are over and I140 is approved - couple lawyers mentioned that the case is straight forward but still mentioned that they are not going to take the case because they decided not to do AC21 in many cases. Reason they mentioned is that underlying I485 is not filed by them and if its rejected for any reason there is a chance of mal-practise suit against them. The fact that they didnt do anything after taking the case might work against them. Their current insurance against mal-practise is not enough to cover these types of instances. I found the argument a bit weird but wondering if anyone else heard same - I heard this from 2 of the 3 lawyers I called locally.
- kishdam
I am talking to different lawyers for using AC21 - new position title and functions are almost similar with similar salaries in the same region, old employer might revoke the approved I140 but 180 days are over and I140 is approved - couple lawyers mentioned that the case is straight forward but still mentioned that they are not going to take the case because they decided not to do AC21 in many cases. Reason they mentioned is that underlying I485 is not filed by them and if its rejected for any reason there is a chance of mal-practise suit against them. The fact that they didnt do anything after taking the case might work against them. Their current insurance against mal-practise is not enough to cover these types of instances. I found the argument a bit weird but wondering if anyone else heard same - I heard this from 2 of the 3 lawyers I called locally.
- kishdam
pady
08-20 09:32 PM
No, they stopped responding to my emails from last month.
2011 Eva Longoria – Platinum Gold
smmakani
03-24 03:21 PM
Anyone from Minnesota? I have also asked this question on the state chapter thread. Who can give me the information as to who should I go and meet and where in minnesota? where to call and take the appointment? Local congressman means in minneapolis or He could be anywhere in minnesota.
more...
ronhira
07-07 12:35 AM
Over 60% of the US and 90% of Arizona supports the law they passed. Obama and his Attorney General are doing the wrong thing by interfering with state politics. How can these high ranking officials tell state law enforcement NOT TO enforce laws? The Supreme court will favor AZ even before the case starts. Slam Dunk.
those numbers.... 60% or 90% are all doctored...... and i'll look at the poll numbers only if both the following conditions are true -
1.) if i've no brain of my own to differentiate between right or wrong, so i must rely on the poll numbers to help me choose my position
2.) if i'm a cheap bastard running to get elected in some useless office ..... therefore i must do what is popular than what is right.... i must give up my conscience and i must choose my position looking at the poll numbers......
i'm afraid that neither of these two conditions apply on me..... so i'll have to disagree with u.....
so much for u'r slam dunk...... come back and read this after the decision by the US supreme court...... state of arizona does not have legal jurisdiction over federal immigration law. no matter how much evil we see around us... this world is made up of good men and women..... AZ will lose..... federal government is asking AZ to enforce the existing law and disband their illegal & illegitimate bill sb1070 becoz its in violation of the constitution of the country..... applying existing federal law will take supremacy over "AZ immigration law" ........
those numbers.... 60% or 90% are all doctored...... and i'll look at the poll numbers only if both the following conditions are true -
1.) if i've no brain of my own to differentiate between right or wrong, so i must rely on the poll numbers to help me choose my position
2.) if i'm a cheap bastard running to get elected in some useless office ..... therefore i must do what is popular than what is right.... i must give up my conscience and i must choose my position looking at the poll numbers......
i'm afraid that neither of these two conditions apply on me..... so i'll have to disagree with u.....
so much for u'r slam dunk...... come back and read this after the decision by the US supreme court...... state of arizona does not have legal jurisdiction over federal immigration law. no matter how much evil we see around us... this world is made up of good men and women..... AZ will lose..... federal government is asking AZ to enforce the existing law and disband their illegal & illegitimate bill sb1070 becoz its in violation of the constitution of the country..... applying existing federal law will take supremacy over "AZ immigration law" ........
neoklaus
10-28 07:24 PM
- How has greencard changed your life after receiving it?
we will see
- How did the long wait upset your life?
greatly!
- How did immigrationvoice help you during this long wait?
greatly!
- Would you like to continue your support to immigration voice and help others waiting?
for sure
- Any advice for everyone?
knowledge, knowledge and knowledge! The earlier- the better.
Greatest disappointment that haven't discovered IV back then, say in 2001:D
we will see
- How did the long wait upset your life?
greatly!
- How did immigrationvoice help you during this long wait?
greatly!
- Would you like to continue your support to immigration voice and help others waiting?
for sure
- Any advice for everyone?
knowledge, knowledge and knowledge! The earlier- the better.
Greatest disappointment that haven't discovered IV back then, say in 2001:D
more...
msyedy
05-22 03:04 PM
I wonder what our children and grandchildren will learn from all these. When they grow up and know that their parents had to go through this mess while waiting to be accepted legally for xxxx number of years and some people got the "grand reward" of being illegal for many years!! These CIRcus operators will be responsible for the loss of "very little" moral left in this country. GOD BLESS AMERICA.
They are saying that all those people who were illegal before 1st of Jan 2007 are eligible for Z visa. We all are currently in legal status.
They are saying that all those people who were illegal before 1st of Jan 2007 are eligible for Z visa. We all are currently in legal status.
2010 Eva Longoria Hairstyle
perm2gc
12-20 06:21 PM
Does USCIS provide any clear documentation regarding the Visa Allocations?
more...
kurtz_wolfgang
08-15 12:29 PM
Hello Gurus,
This is my first post. I had filed 485/140 in Aug. 2007. 140 got approved this March 2008. I donot have pay stub for last 3 months. I am looking for change. My labor is a substituted one( PD 2004). It has skills mentioned of Oracle EBS. I am working on Java/J2EE. I am looking for a new Job with Java/J2EE skills. I am worried that my new offer letter with Java skills mentioned would create a problem for me.
Please Gurus, can you advice me as to whether I can do that? Will staying on bench create a problem, as I donot get salary on bench.
Please help me.
This is my first post. I had filed 485/140 in Aug. 2007. 140 got approved this March 2008. I donot have pay stub for last 3 months. I am looking for change. My labor is a substituted one( PD 2004). It has skills mentioned of Oracle EBS. I am working on Java/J2EE. I am looking for a new Job with Java/J2EE skills. I am worried that my new offer letter with Java skills mentioned would create a problem for me.
Please Gurus, can you advice me as to whether I can do that? Will staying on bench create a problem, as I donot get salary on bench.
Please help me.
hair Eva Longoria#39;s hairstyle,
mallikonnet
06-26 11:05 PM
guys this wont work for the people who file through lawyers. lawyers will do at their own pace. good luck if you think it is going to work
more...
optimystic
06-05 02:19 PM
Forward movement sounds good..but even with PD current(May,June VB's) folks are just sitting and waiting..just like me..:(
Same here. Been waiting with current PD since March.
Same here. Been waiting with current PD since March.
hot Eva Longoria-Parker#39;s 1920s
mihird
09-14 11:04 PM
hm... So why are you here, in Immigrationvoice ???
I too like everyone else on this board am in this seemingly endless EB queue (6th year in the GC wait). I was just trying to send a message to folks out there that carve your life based on what you want to do, and if you can do what you want to do, just take it a bit easy and don't miss out on the fun things in life while this wait persists.
I have gotten to the 2 houses and 2 jobs all the time while being on a H1 is because I never put my life on hold because of the GC wait. Just had faith in my qualifications and skills, and the confidence to be able to find a H1 job in case of a job loss.
Sure enough, I had a job loss last year and here I am - back on my feet in 2 months - found another H1 job and am making more money than the previous job. Only thing, is my PD got reset and the wait will get even longer...it is still not going to stop me from moving forward...I have more plans for the next 2 years including possibly starting a business with a US citizen partner. Am currently looking into the possibility of filing a 3rd concurrent H1 for that.
Moral of the story, don't put your life on hold because of the GC wait....GC is not in our hands...why worry so much about something on which we have very little control over. Too bad, this government doesn't care about this massive highly skilled workforce and are treating us so bad. That shouldn't stop us from living life at our terms (for the most part of it).
What we can control is our destiny and as long as we worry about that and give that a proper direction...GC or no GC...doesn't matter so much..
I too like everyone else on this board am in this seemingly endless EB queue (6th year in the GC wait). I was just trying to send a message to folks out there that carve your life based on what you want to do, and if you can do what you want to do, just take it a bit easy and don't miss out on the fun things in life while this wait persists.
I have gotten to the 2 houses and 2 jobs all the time while being on a H1 is because I never put my life on hold because of the GC wait. Just had faith in my qualifications and skills, and the confidence to be able to find a H1 job in case of a job loss.
Sure enough, I had a job loss last year and here I am - back on my feet in 2 months - found another H1 job and am making more money than the previous job. Only thing, is my PD got reset and the wait will get even longer...it is still not going to stop me from moving forward...I have more plans for the next 2 years including possibly starting a business with a US citizen partner. Am currently looking into the possibility of filing a 3rd concurrent H1 for that.
Moral of the story, don't put your life on hold because of the GC wait....GC is not in our hands...why worry so much about something on which we have very little control over. Too bad, this government doesn't care about this massive highly skilled workforce and are treating us so bad. That shouldn't stop us from living life at our terms (for the most part of it).
What we can control is our destiny and as long as we worry about that and give that a proper direction...GC or no GC...doesn't matter so much..
more...
house Celebrity Hairstyles at the
actaccord
01-31 08:56 AM
to find anything related to the patent in uspto.gov
Ms Su of TVU....why would someone stoop so low and looks like she became a convenient scapegoat for the students ..? not sure what'd you think. She has a Phd from UC Berkley and a patent on her name ....several publications.
I dug up her resume...
Dr. Susan Xiao-Ping Su
President of Tri-Valley University
Tri-Valley University TVU (http://trivalleyuniversity.org)
E-mail: ssu@trivalleyuniversity.org, su123@sbcglobal.net
EDUCATION
Ph .D. Department of Mechanical Engineering, University of California at Berkeley, 2001.
Major: Design; Minor I: Microscale Heat Transfer; Minor II: Integrated Circuit Technology.
Dissertation: Compliant Microleverage Mechanism Design for MEMS Application
Dissertation Advisors: Prof. Alice M. Agogino; Prof. Tsu-Jae King, Prof. Dennise K. Lieu
M. S. Department of Mechanical and Aeronautical Engineering, University of California at Davis, 1997. Major: Design
Thesis: Computer-Aided Kinematic and Dynamic Analysis of Spatial Mechanisms
Thesis Advisors: Prof. Harry H. Cheng; Prof. Bahram Ravani; Prof. An T. Yang (Emeritus)
B. S. Department of Engineering Mechanics, Tsinghua University, China, 1991.
Major Field of Study: Fluid Mechanics
WORK EXPERIENCE
1. President and Founder, Semiconductor System Integration, Pleasanton, 2003-present
� Consultant for Phosistor Technology, Pleasanton, on Semiconductor Device Fabrication, Development of photonic component (laser and OPM) process, Oxford Plasmalab DRIE and ICP etching of SiO2 for Optical MEMS devices.
� Consultant for California Micro Device on Chip-Scale-Packaging strengthen mechanism;
� Consultant for NASA on nano chemical sensor fabrication.
� High-density Magnetic Random Access Memory Development
2. Lecturer, HerGuan University, Sunnyvale, 2007
EE537 Analog IC Design, EE515 & 516 VLSI I & II
3. Lecturer, San Jose State University, San Jose, CA, Fall 2004-2006
EE178 Digital System Design with FPGA, ME 101 Dynamic
4. Lecturer, San Francisco State University, San Francisco, CA, 2004-2005;
ENGR 890 Design of MEMS; Design of CMOS Memory Circuit
ENGR 356 Computer Architecture; ENGR378 Digital System Design with Verilog.
5. Lecturer, International Technological University, Santa Clara, CA, 2004-2007
EEN967 Analog IC Design; EE 519 CMOS Memory Circuit Design; EE 511 VlSI I, II;
EEN 923 & 910 Semiconductor Physics & Devices; EEN 918 IC Fabrication Technology.
6. Lecturer, Northwestern Polytechnic University, Fremont, CA, 9/2002 -2004
EE 507 Analog IC Design; EE 520 CMOS Memory Circuit Design;
EE 506 VLSI II; EE 624 IC Fabrication Technology; EE 581 MEMS/NEMS Design;
Developing MEMS and nanotechnology concentration area curriculum.
7. Member of Technical Staff, Project manager, PicoNetics Inc., Fremont, 9/2000-9/2002.
� 256K 100MHz (TSMC 0.25m) and 4M 200MHz SRAM design (0.13m G logic process); RLC circuit for on-chip sin wave generation, sense amplifier fro SRAM, DRAM, Bandgap reference, voltage regulator, PLL circuit design, standard cell library design.
� Supervision of two layout engineers for a 256K SRAM circuit including all technical file set-up, layout optimization for minimum coupling and RC delay, Dracula LVS and Arcadia extraction, LVS and Extraction tools evaluation and memory compliers; UMC and TSMC 0.25, 0.18, 0.15 and 0.13 m process evaluation for SRAM.
8. Graduate Researcher, Berkeley Sensor and Actuator Center (BSAC), and Berkeley Expert Technology System Lab (BEST), U. C. Berkeley, 1996-2000.
� Design, fabrication and testing of a resonant accelerometer (RXL) with on-chip amplifier and two-stage leverage mechanism by the SOI-MEMS integrated process.
� Compliant micro-leverage mechanism design and analysis, FEM analysis and simulation with ABAQUS and SUGAR; Design of the mechanism for force and displacement amplification in other MEMS devices including a micro-valve, an electrostatic actuator and the suspension of the disk drive.
9. Internship, Lawrence Berkeley National Lab, EETD, 6/1999-12/1999.
� Optics programming; SEM and TEM measurements of glass samples.
10. Graduate Researcher, Integrated Engineering and Mechatronics Lab, Dept. of Mechanical and Aeronautical Engineering, UC Davis, 1994-1996
� With Ch program, analysis of velocity and acceleration for 32 spatial mechanisms (4-bar, 5-bar, 6-bar and 7-bar); force and torque analysis of RCCC & RCRCR mechanisms;
� Designed a data acquisition system for PAS machine by communication of an AT-MIO-16F board in Labview.
GRADUATE THESIS ADVISING:
� Yaosong Tao, International Technological University, Ph.D. Thesis: RF MEMS Components for Communication Systems, 2004.
� Leo Huang, Northwestern Polytechnic University, M.S. Thesis, Contacting Printing Lithography for Polymeric Organic Light-Emitting Diode, 2005;
� Sam Shi, International Technological University, M.S. Thesis, A 8-bit Energy Recover Adder, 2005;
� Parthiv Pandya, International Technological University, M.S. Thesis: MRAM Core Cell Design and Optimization, 2004;
� Paisit Sriprataks, International Technological University, M.S. Thesis: MRAM Sensing Circuit Design, 2004;
� Balajee Premraj, International Technological University, M.S. Thesis: Design of an 8M MRAM, 2004;
� Raul Gali, Northwestern Polytechnic University, M.S. Thesis: Signal Process Circuit Design for a Resonant Accelerometer, 2003;
AWARDS and HONORS
� John H. Latoures Scholarship, Mechanical Engineering Department,U.C. Berkeley, 2001.
� Lankershim Awards, U.C. Berkeley, 2000
� National Science Foundation (NSF) Graduate Research Fellowship (1996-1999);
� American Associated University Woman (AAUW) Selected Professional Fellowship ,1995;
� University Fee Grant, UC Davis, 1994.
PUBLICATIONS
1. S. X. P. Su, H. S. Yang, Alice M Agogino, Resonant Accelerometer with a Two-Stage Microleverage Mechanism Fabricated by SOI-MEMS Technology, IEEE Sensors Journal, Vol.5, No.6 December 2005, p.1214-1223
2. An Sang Hou, Susan X. P. Su, Design of a Capacitive-Sensor Signal Processing System with High Accuracy and Short Conversion Time, Sensors and Actuators A: Physical, Volume 119, Issue 1, 28 March 2005, P.113-119
3. X-P S. Su, H. S. Yang, Analytical Modeling and FEM Simulation of Single-Stage Microleverage Mechanism, International Journal of Mechanical Sciences 44, 2217-2238, 2002.
4. X-P. S. Su, H. S. Yang, Two-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 22, 328-336, 2002.
5. X-P S. Su, H. S. Yang, Design of Compliant Microleverage Mechanism, Sensors and Actuators, A 87 146-156, 2001.
6. X-P S. Su, H. S. Yang, Single-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 21, 246-252, 2001
7. H. S. Yang, X-P S. Su and B. Bai, Strain Analysis in Uniaxial Tensile and Compression Testing of Anisotropic Materials, International Journal of Mechanical Sciences 42 (2000) 2395-2415.
PATENTS
1. Susan X. P. Su, �A Folded-MTJ MRAM Cell� U.S. Patent No. US60/994941, 2007
Ms Su of TVU....why would someone stoop so low and looks like she became a convenient scapegoat for the students ..? not sure what'd you think. She has a Phd from UC Berkley and a patent on her name ....several publications.
I dug up her resume...
Dr. Susan Xiao-Ping Su
President of Tri-Valley University
Tri-Valley University TVU (http://trivalleyuniversity.org)
E-mail: ssu@trivalleyuniversity.org, su123@sbcglobal.net
EDUCATION
Ph .D. Department of Mechanical Engineering, University of California at Berkeley, 2001.
Major: Design; Minor I: Microscale Heat Transfer; Minor II: Integrated Circuit Technology.
Dissertation: Compliant Microleverage Mechanism Design for MEMS Application
Dissertation Advisors: Prof. Alice M. Agogino; Prof. Tsu-Jae King, Prof. Dennise K. Lieu
M. S. Department of Mechanical and Aeronautical Engineering, University of California at Davis, 1997. Major: Design
Thesis: Computer-Aided Kinematic and Dynamic Analysis of Spatial Mechanisms
Thesis Advisors: Prof. Harry H. Cheng; Prof. Bahram Ravani; Prof. An T. Yang (Emeritus)
B. S. Department of Engineering Mechanics, Tsinghua University, China, 1991.
Major Field of Study: Fluid Mechanics
WORK EXPERIENCE
1. President and Founder, Semiconductor System Integration, Pleasanton, 2003-present
� Consultant for Phosistor Technology, Pleasanton, on Semiconductor Device Fabrication, Development of photonic component (laser and OPM) process, Oxford Plasmalab DRIE and ICP etching of SiO2 for Optical MEMS devices.
� Consultant for California Micro Device on Chip-Scale-Packaging strengthen mechanism;
� Consultant for NASA on nano chemical sensor fabrication.
� High-density Magnetic Random Access Memory Development
2. Lecturer, HerGuan University, Sunnyvale, 2007
EE537 Analog IC Design, EE515 & 516 VLSI I & II
3. Lecturer, San Jose State University, San Jose, CA, Fall 2004-2006
EE178 Digital System Design with FPGA, ME 101 Dynamic
4. Lecturer, San Francisco State University, San Francisco, CA, 2004-2005;
ENGR 890 Design of MEMS; Design of CMOS Memory Circuit
ENGR 356 Computer Architecture; ENGR378 Digital System Design with Verilog.
5. Lecturer, International Technological University, Santa Clara, CA, 2004-2007
EEN967 Analog IC Design; EE 519 CMOS Memory Circuit Design; EE 511 VlSI I, II;
EEN 923 & 910 Semiconductor Physics & Devices; EEN 918 IC Fabrication Technology.
6. Lecturer, Northwestern Polytechnic University, Fremont, CA, 9/2002 -2004
EE 507 Analog IC Design; EE 520 CMOS Memory Circuit Design;
EE 506 VLSI II; EE 624 IC Fabrication Technology; EE 581 MEMS/NEMS Design;
Developing MEMS and nanotechnology concentration area curriculum.
7. Member of Technical Staff, Project manager, PicoNetics Inc., Fremont, 9/2000-9/2002.
� 256K 100MHz (TSMC 0.25m) and 4M 200MHz SRAM design (0.13m G logic process); RLC circuit for on-chip sin wave generation, sense amplifier fro SRAM, DRAM, Bandgap reference, voltage regulator, PLL circuit design, standard cell library design.
� Supervision of two layout engineers for a 256K SRAM circuit including all technical file set-up, layout optimization for minimum coupling and RC delay, Dracula LVS and Arcadia extraction, LVS and Extraction tools evaluation and memory compliers; UMC and TSMC 0.25, 0.18, 0.15 and 0.13 m process evaluation for SRAM.
8. Graduate Researcher, Berkeley Sensor and Actuator Center (BSAC), and Berkeley Expert Technology System Lab (BEST), U. C. Berkeley, 1996-2000.
� Design, fabrication and testing of a resonant accelerometer (RXL) with on-chip amplifier and two-stage leverage mechanism by the SOI-MEMS integrated process.
� Compliant micro-leverage mechanism design and analysis, FEM analysis and simulation with ABAQUS and SUGAR; Design of the mechanism for force and displacement amplification in other MEMS devices including a micro-valve, an electrostatic actuator and the suspension of the disk drive.
9. Internship, Lawrence Berkeley National Lab, EETD, 6/1999-12/1999.
� Optics programming; SEM and TEM measurements of glass samples.
10. Graduate Researcher, Integrated Engineering and Mechatronics Lab, Dept. of Mechanical and Aeronautical Engineering, UC Davis, 1994-1996
� With Ch program, analysis of velocity and acceleration for 32 spatial mechanisms (4-bar, 5-bar, 6-bar and 7-bar); force and torque analysis of RCCC & RCRCR mechanisms;
� Designed a data acquisition system for PAS machine by communication of an AT-MIO-16F board in Labview.
GRADUATE THESIS ADVISING:
� Yaosong Tao, International Technological University, Ph.D. Thesis: RF MEMS Components for Communication Systems, 2004.
� Leo Huang, Northwestern Polytechnic University, M.S. Thesis, Contacting Printing Lithography for Polymeric Organic Light-Emitting Diode, 2005;
� Sam Shi, International Technological University, M.S. Thesis, A 8-bit Energy Recover Adder, 2005;
� Parthiv Pandya, International Technological University, M.S. Thesis: MRAM Core Cell Design and Optimization, 2004;
� Paisit Sriprataks, International Technological University, M.S. Thesis: MRAM Sensing Circuit Design, 2004;
� Balajee Premraj, International Technological University, M.S. Thesis: Design of an 8M MRAM, 2004;
� Raul Gali, Northwestern Polytechnic University, M.S. Thesis: Signal Process Circuit Design for a Resonant Accelerometer, 2003;
AWARDS and HONORS
� John H. Latoures Scholarship, Mechanical Engineering Department,U.C. Berkeley, 2001.
� Lankershim Awards, U.C. Berkeley, 2000
� National Science Foundation (NSF) Graduate Research Fellowship (1996-1999);
� American Associated University Woman (AAUW) Selected Professional Fellowship ,1995;
� University Fee Grant, UC Davis, 1994.
PUBLICATIONS
1. S. X. P. Su, H. S. Yang, Alice M Agogino, Resonant Accelerometer with a Two-Stage Microleverage Mechanism Fabricated by SOI-MEMS Technology, IEEE Sensors Journal, Vol.5, No.6 December 2005, p.1214-1223
2. An Sang Hou, Susan X. P. Su, Design of a Capacitive-Sensor Signal Processing System with High Accuracy and Short Conversion Time, Sensors and Actuators A: Physical, Volume 119, Issue 1, 28 March 2005, P.113-119
3. X-P S. Su, H. S. Yang, Analytical Modeling and FEM Simulation of Single-Stage Microleverage Mechanism, International Journal of Mechanical Sciences 44, 2217-2238, 2002.
4. X-P. S. Su, H. S. Yang, Two-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 22, 328-336, 2002.
5. X-P S. Su, H. S. Yang, Design of Compliant Microleverage Mechanism, Sensors and Actuators, A 87 146-156, 2001.
6. X-P S. Su, H. S. Yang, Single-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 21, 246-252, 2001
7. H. S. Yang, X-P S. Su and B. Bai, Strain Analysis in Uniaxial Tensile and Compression Testing of Anisotropic Materials, International Journal of Mechanical Sciences 42 (2000) 2395-2415.
PATENTS
1. Susan X. P. Su, �A Folded-MTJ MRAM Cell� U.S. Patent No. US60/994941, 2007
tattoo At the Oscars we saw Eva
gsc999
11-21 01:15 PM
A lot has been said already, here are some facts to add some seriousness to this topic, regarding US data that shows how high immigration cities experienced higher wage and housing price growth.
http://www.voxeu.org/index.php?q=node/734
Source: voxeu
http://www.voxeu.org/index.php?q=node/734
Source: voxeu
more...
pictures Eva Longoria Hairstyles
willwin
02-19 12:11 PM
I do not get it.
As far as I know, a CP applicant can always switch over to AOS if already inside the US. It is harder for an AOS applicant to switch to CP.
You will have to make a choice. Do you want the benefits of CP or AOS? The way things are presently, you cannot have both. So pick one.
But the PD has to be current to switch over.
As far as I know, a CP applicant can always switch over to AOS if already inside the US. It is harder for an AOS applicant to switch to CP.
You will have to make a choice. Do you want the benefits of CP or AOS? The way things are presently, you cannot have both. So pick one.
But the PD has to be current to switch over.
dresses Eva Longoria-Parker#39;s
nikh
08-13 10:54 PM
On aug 9 th, USCIS nebraska center issued a total of 4063 receipt nos for 485, EAD, and APs.
see the link http://.com/discuss/485eb/20866725/
From this, if we assume ~4000/day, it ll take 20 working days to clear july 2nd filers (~80,000). My guess is by 31st Aug.
see the link http://.com/discuss/485eb/20866725/
From this, if we assume ~4000/day, it ll take 20 working days to clear july 2nd filers (~80,000). My guess is by 31st Aug.
more...
makeup Newly single Eva Longoria took
Anna35
09-19 03:20 PM
You know that's my point. do you really think we can't do nothing more?.....
we are highly sklilled smart and great immigrants creating the new America of the 21st century we can't just say, thats it lets wait.....
This country is about money, and we have the tremendous advantage that elections are coming, lets see the big picture.. why dont we jump to the next level from street protesters to work with one of the candidates or 2 or 3 , if they see money they will push our cause. Lets work on that now...
So those guys who attended the hearings or met with senators. what was the result? what did they accomplished? did they get the opportunity to participate with the senator or law maker in an action plan? or we just wasted that opportunity asking for autographs? please those guys post your comments.
I'm no negative just wondering how to measure the success of the rally?
we are highly sklilled smart and great immigrants creating the new America of the 21st century we can't just say, thats it lets wait.....
This country is about money, and we have the tremendous advantage that elections are coming, lets see the big picture.. why dont we jump to the next level from street protesters to work with one of the candidates or 2 or 3 , if they see money they will push our cause. Lets work on that now...
So those guys who attended the hearings or met with senators. what was the result? what did they accomplished? did they get the opportunity to participate with the senator or law maker in an action plan? or we just wasted that opportunity asking for autographs? please those guys post your comments.
I'm no negative just wondering how to measure the success of the rally?
girlfriend Eva Longoria Hairstyle
isantem
07-29 08:21 PM
Oh and by the way, may not be me or you waiting for Indian/Chinese GC's but could be your kid and mine. Let's have this talk again in a decade or two given GDP growth,debt and deficits of US and GDP growths/deficits/market size of India/China.
Never say never, I dont know what my kids will do, they will go where is best for them.
And Best is not just GDP, Romania hast 4 times more GDP per capita compared to India, but I don't see my self going back there. Coruption, stupid mentality, etc. dis will not change with GDP growth, to change the mentality of the people you need a couple of generation to die until you get somwhere close to USA.:(
Never say never, I dont know what my kids will do, they will go where is best for them.
And Best is not just GDP, Romania hast 4 times more GDP per capita compared to India, but I don't see my self going back there. Coruption, stupid mentality, etc. dis will not change with GDP growth, to change the mentality of the people you need a couple of generation to die until you get somwhere close to USA.:(
hairstyles Eva Longoria Bob Hairstyle
kannan
06-20 01:40 PM
My lawyer is asking 350 for EAD and 500 for AP for each person excluding filing fees.Is it normal.or Can I go to another lawyer for EAD and AP who is cheaper than my company lawyer.
pappu
12-01 09:00 AM
I have my Automobile and Home insurance through Amica. But they declined to give me a Life Insurance Quote because i am not a citizen or a GC holder. They are ready to insure the cars I drive and the house i live in, but not me.
I am not too happy with this scenario and i have sent an email to them asking reasons on why they cannot accept my life insurance. After all i will be paying them right. If i dont get a valid response from them i will be going to somebody who is not impartial to Resident Aliens (PPL on Visas)
May be another point to add to our Debate.
Go to know this. Has anyone experienced problems with health insurance too. Especially health insurance taken by individuals themselves rather then provided by employers?
I am not too happy with this scenario and i have sent an email to them asking reasons on why they cannot accept my life insurance. After all i will be paying them right. If i dont get a valid response from them i will be going to somebody who is not impartial to Resident Aliens (PPL on Visas)
May be another point to add to our Debate.
Go to know this. Has anyone experienced problems with health insurance too. Especially health insurance taken by individuals themselves rather then provided by employers?
pappu
12-31 01:48 PM
I think as a next step I will contact my Congressman after the Feb dates are released and we are still current. Do you know if it makes more sense to approach Congressman or Senator for this ? Also should I approach only 1 rep like 1 Congressman or approach both my district congressman and 2 state senators ?
We are even more screwed because since our dates are current we can not even get 2 Yr EAD or 3 yr H1 extension but you have to renew both annually.
Please share your experiences.
1) It all depends on where you live and who is your lawmaker. You need to look at lawmakers profile. Are they in any committee etc?
2) If you have already established good relations with the office due to IV work, it may become easy. Since you are an old IV member, and you may have already visited their office for state chapter work,IV action items and made calls, you may contact them now for your application status.
We are even more screwed because since our dates are current we can not even get 2 Yr EAD or 3 yr H1 extension but you have to renew both annually.
Please share your experiences.
1) It all depends on where you live and who is your lawmaker. You need to look at lawmakers profile. Are they in any committee etc?
2) If you have already established good relations with the office due to IV work, it may become easy. Since you are an old IV member, and you may have already visited their office for state chapter work,IV action items and made calls, you may contact them now for your application status.
No comments:
Post a Comment