singhsa3
08-20 07:05 PM
Just curious any July 2nd filler , filled at NSC with an approved I-140 and have PD earlier than 1/1/06 still waiting?
wallpaper Cameron Diaz Boobs
pthoko
07-05 03:18 PM
Yes I got an I-94 with the transfer(Same I-94 number as the L1 one). I didn't go out of US after that.
Please note that I joined the H1 employer and later got an H1 transfer approved also.
Thanks.
Please note that I joined the H1 employer and later got an H1 transfer approved also.
Thanks.
needhelp!
11-06 07:41 PM
What about the 60 000 who are expected to attend diwali mela in dfw.. I am guessing a chunk of them are green card applicants
2011 Huge oobs
Irs
02-10 01:17 PM
If there is a change of work location (address), amendment to the existing LCA or new LCA should be filed/certified for the new work location/address. No Exceptions.
I went through this last year as one of my work location moved about 5 miles from one of my previous location. Our company lawyer mentioned that if there is a change of work location address on what was mentioned on your previous certified LCA, amendment to the existing LCA or new LCA should be filed/certified. As the LCA is for specific work location(address) that is entered in detail when LCA is submitted.
I went through this last year as one of my work location moved about 5 miles from one of my previous location. Our company lawyer mentioned that if there is a change of work location address on what was mentioned on your previous certified LCA, amendment to the existing LCA or new LCA should be filed/certified. As the LCA is for specific work location(address) that is entered in detail when LCA is submitted.
more...
Libra
09-09 07:59 AM
IV is working on to give a chance to IndiaBULL to apply for I-485 even his/her PD is not current.
can some one tell me what IV is currently working on?
can some one tell me what IV is currently working on?
eb3India
04-09 12:47 PM
President Bush is talking about CIR in Arizona, before the talk on MSNBC there was interesting discussion on whatz coming for CIR
itz that time again guys I see this as a kickoff from whitehouse on STRIVE and immigration reform,
will update here as it goes by,
itz that time again guys I see this as a kickoff from whitehouse on STRIVE and immigration reform,
will update here as it goes by,
more...
rongch60
06-27 12:48 PM
Replacement EAD means replacing lost EAD, and only 1-year EAD will be issued. Most people apply for EAD renewal, which is OK for 2-year EAD.
2010 unseen oobs wallpapers
hunkuncontrolled
03-04 05:55 PM
congrats ..u got it after 15 years ....Now start waiting for citizenship for another 5 yrs and your half life would be over..
more...
lostinbeta
10-05 03:05 AM
Thank you Syko:)
I love Photoshop. It is the only art program I have. I wish I could afford 3dsmax and/or Adobe Illustrator, but I dont think that is going to be happening anytime soon:(
The Flash in the center is actually an easy effect to come up with without 3dsmax :P
PS: Nice Sig :)
I love Photoshop. It is the only art program I have. I wish I could afford 3dsmax and/or Adobe Illustrator, but I dont think that is going to be happening anytime soon:(
The Flash in the center is actually an easy effect to come up with without 3dsmax :P
PS: Nice Sig :)
hair wallpapers. Sexy Big Boobs
marty
01-09 11:30 AM
We need to talk to our local govt. officials about the delay and discrepancy in the processing times published for the USCIS service centers. Please go to the following URLs and find out about your local govt. representative:
US House of Representatives
https://writerep.house.gov/writerep/welcome.shtml
US Senate
http://www.senate.gov/general/contact_information/senators_cfm.cfm
I am providing you the text that you can use in your e-mail. Please also download the processing time for the service centers from the following URL:
http://www.filefactory.com/file/a014c1d/n/Processing_Time-11182008_pdf
------------------------------------------------------------------
E-Mail Subject
Delay and concerns about USCIS processing time updates
E-Mail Text
Dear [Name of your local representative]:
I am writing you in reference to the USCIS processing times updates on their web site at https://egov.uscis.gov/cris/processTimesDisplay.do. Following are my concerns:
1. The last update on processing time was published on November 18, 2008. No update was made to the processing time since November 18, 2008.
2. There appears to be discrepancy between the dates the processing time is posted and the service center processing dates. Attached is the processing time report from November 18, 2008 for California Service Center, Nebraska Service Center, Texas Service Center, and Vermont Service center. Please notice the date processing time was posted was November 18, 2008 and the service center processing dates was given as of September 30, 2008.
I will appreciate if a corrective action is taken so that the processing times are published on time and the discrepancy between the date posted and service center processing date is addressed.
Thank you,
[Your Name]
------------------------------------------------------------------
Please let me know if anything else needs to be added to the e-mail text.
Thanks.
US House of Representatives
https://writerep.house.gov/writerep/welcome.shtml
US Senate
http://www.senate.gov/general/contact_information/senators_cfm.cfm
I am providing you the text that you can use in your e-mail. Please also download the processing time for the service centers from the following URL:
http://www.filefactory.com/file/a014c1d/n/Processing_Time-11182008_pdf
------------------------------------------------------------------
E-Mail Subject
Delay and concerns about USCIS processing time updates
E-Mail Text
Dear [Name of your local representative]:
I am writing you in reference to the USCIS processing times updates on their web site at https://egov.uscis.gov/cris/processTimesDisplay.do. Following are my concerns:
1. The last update on processing time was published on November 18, 2008. No update was made to the processing time since November 18, 2008.
2. There appears to be discrepancy between the dates the processing time is posted and the service center processing dates. Attached is the processing time report from November 18, 2008 for California Service Center, Nebraska Service Center, Texas Service Center, and Vermont Service center. Please notice the date processing time was posted was November 18, 2008 and the service center processing dates was given as of September 30, 2008.
I will appreciate if a corrective action is taken so that the processing times are published on time and the discrepancy between the date posted and service center processing date is addressed.
Thank you,
[Your Name]
------------------------------------------------------------------
Please let me know if anything else needs to be added to the e-mail text.
Thanks.
more...
roseball
02-09 03:08 PM
Hi,
My spouse is working on H1-B in Los Angeles. His company acquired another company in Bay Area, so now he wants to work out of Bay Area, from this acquired company's office.
1. Does he need to file a transfer memorandum ?
2. WIll there be a change in wages ?
3. Are there any other steps before he starts to work in BayArea ?
Please help.
Thanks.
If the new place of employment is more than 50 miles, then a new LCA has to be obtained. In your case, your parent company might also have to file a Successor of Interest petition for your H1 depending on the terms of acquisition (irrespective of whether you move to bay area or not).
My spouse is working on H1-B in Los Angeles. His company acquired another company in Bay Area, so now he wants to work out of Bay Area, from this acquired company's office.
1. Does he need to file a transfer memorandum ?
2. WIll there be a change in wages ?
3. Are there any other steps before he starts to work in BayArea ?
Please help.
Thanks.
If the new place of employment is more than 50 miles, then a new LCA has to be obtained. In your case, your parent company might also have to file a Successor of Interest petition for your H1 depending on the terms of acquisition (irrespective of whether you move to bay area or not).
hot ashley Boobs wallpapers
yestogc
05-21 12:02 AM
This debate is very old one and no one talks about the refinement of EB GC process
more...
house Hot Boobs wallpapers
smartboy75
08-14 12:53 PM
smartboy75,
We are in similar situation only difference in our case it the RFE is for me and we have our FP appointment scheduled on Aug 22nd 2008.
My attorney adviced us to bring in RFE letter with us and during FP appointment get it filed in by the Immigration officer who takes FP.
Our attorney also suggested me to send FP appoitnment notification letter for my wife alongwith my RFE, so USCIS idiots know that this couple already done with their FP.
This is ridiculous, e-file applicants have to go thro' this process of unnecessary RFE and delaying the process. Luckily for me my current EAD expires in Oct 2008, so we still have some time, but tink about the folks for whom the EAD is about to expire and USCIS delaying the process.
I recommend stornly to go for Paper filed EAD renewals. Onoine EAD is convenient, but then you have to go thro' the hasle of FP schedule and the RFEs.
rajuseattle.
Hey raju
I did exactly as suggested by the attorney....I got the RFE filled by the immigration lady...took a copy of my wife's appointment notice with the biometric stamp on it and added a one page letter and mailed it to USCIS today by overnight delivery.....
To ur question of paper filed or E-filed ..while I agree that there is a hassle of bimoetric but in the other hand there is direct confirmation of USCIS receipt of the application....
Imagine u paper filed the renewal and send the package and for weeks u do not get a confirmation number for ur application.....that is even more frustrating than the hassle of e-file......
not knowing where u r heading is worst than being lost ....:) The choice is ours....
All the best buddy ....will keep u posted....
We are in similar situation only difference in our case it the RFE is for me and we have our FP appointment scheduled on Aug 22nd 2008.
My attorney adviced us to bring in RFE letter with us and during FP appointment get it filed in by the Immigration officer who takes FP.
Our attorney also suggested me to send FP appoitnment notification letter for my wife alongwith my RFE, so USCIS idiots know that this couple already done with their FP.
This is ridiculous, e-file applicants have to go thro' this process of unnecessary RFE and delaying the process. Luckily for me my current EAD expires in Oct 2008, so we still have some time, but tink about the folks for whom the EAD is about to expire and USCIS delaying the process.
I recommend stornly to go for Paper filed EAD renewals. Onoine EAD is convenient, but then you have to go thro' the hasle of FP schedule and the RFEs.
rajuseattle.
Hey raju
I did exactly as suggested by the attorney....I got the RFE filled by the immigration lady...took a copy of my wife's appointment notice with the biometric stamp on it and added a one page letter and mailed it to USCIS today by overnight delivery.....
To ur question of paper filed or E-filed ..while I agree that there is a hassle of bimoetric but in the other hand there is direct confirmation of USCIS receipt of the application....
Imagine u paper filed the renewal and send the package and for weeks u do not get a confirmation number for ur application.....that is even more frustrating than the hassle of e-file......
not knowing where u r heading is worst than being lost ....:) The choice is ours....
All the best buddy ....will keep u posted....
tattoo Hot Mallu wallpapers - Nisha
pd052009
04-28 04:11 PM
One of my friends who applied in Jan, got it in 2 weeks. I haven't heard of any delays.
more...
pictures Navel oobs wallpapers
nvodela
09-29 02:31 AM
Check your private message
dresses Big Boobs Mona Lisa Wallpaper
dilvahabilyeha
08-09 01:19 PM
Hi, Thanks for your reply.
Also by any chance is "alien receipt number" same as the A# that appears
in my old OPT-EAD? If yes then perhaps I can use that? I know that
"A#" is called "alien registration number".
Thanks, Mtsaha
it's the A# in your 140 approved petitioin.
Generally spouses won't have this until they get the 485 receipt so they can leave it blank in the 485 application but the principle applicant should have from the 140.
Also by any chance is "alien receipt number" same as the A# that appears
in my old OPT-EAD? If yes then perhaps I can use that? I know that
"A#" is called "alien registration number".
Thanks, Mtsaha
it's the A# in your 140 approved petitioin.
Generally spouses won't have this until they get the 485 receipt so they can leave it blank in the 485 application but the principle applicant should have from the 140.
more...
makeup Busty Boobs Live Wallpaper V1.
webm
09-17 03:31 PM
Keep it up Chandu...Thanks
girlfriend oobs wallpaper. tiwari
vinki
10-27 01:31 PM
hi !
Thank you gurus for your quick response .... have one more question in mind ...
Is it a pre-requisite to have SSN before applying for a job ?
thanks
Vinki
Thank you gurus for your quick response .... have one more question in mind ...
Is it a pre-requisite to have SSN before applying for a job ?
thanks
Vinki
hairstyles Andrea Parker oobs wallpapers
lazycis
12-03 11:36 AM
Lazycis,
Did you inform USCIS after you invoked AC21? Thanks!
No. Both times it was a large company (one has an agreement with a big law firm to handle immigration-related issues). I asked my current employer's attorney about it and she told me not to worry, they never had issues with AC21 portability (employer has 120,000+ employees). She was right regarding my case.
Did you inform USCIS after you invoked AC21? Thanks!
No. Both times it was a large company (one has an agreement with a big law firm to handle immigration-related issues). I asked my current employer's attorney about it and she told me not to worry, they never had issues with AC21 portability (employer has 120,000+ employees). She was right regarding my case.
cubedflash
01-28 10:49 AM
PJ,
Sorry for the delay in the answer. I have never heard of an import staying with your FLA file after being erased. It sounds like there is an error in Flash. I would recommend contacting our support - support@erain.com.
Here are some tips from my friend Rushvision on keeping file size low:
There are a number of different things you can do to decrease the file size of your exported SWF. Here are the some things for you to try.
Scale your objects down in the Scene Editor
Go to the Layout Page on the Properties Toolbar and decrease the scene size. You are working with vectors, so your images will scale back up very nicely once imported into Flash.
Some objects have settings that allow you to change the number of segments used to create it, such as the torus and the sphere. Decreasing the number of segments will reduce the amount of data that needs to be rendered.
Get rid of any unnecessary bevels. These add considerably to the total number of polygons that make up the objects in your scene.
In the Preview and Export Editor under the General Options, you can set the Detail Level to low.
Setting the slider farther over to Curves will usually result in a slightly smaller file size, but don't expect this one to work miracles.
Experiment with the different Fill Settings. There is no one setting that works best for every situation. Try combining outlines with some of the simpler fill settings to get the greatest amount of detail and the smallest file size. It will often be a compromise on some level.
__________________
mrush
Good luck!
-cubedflash
Sorry for the delay in the answer. I have never heard of an import staying with your FLA file after being erased. It sounds like there is an error in Flash. I would recommend contacting our support - support@erain.com.
Here are some tips from my friend Rushvision on keeping file size low:
There are a number of different things you can do to decrease the file size of your exported SWF. Here are the some things for you to try.
Scale your objects down in the Scene Editor
Go to the Layout Page on the Properties Toolbar and decrease the scene size. You are working with vectors, so your images will scale back up very nicely once imported into Flash.
Some objects have settings that allow you to change the number of segments used to create it, such as the torus and the sphere. Decreasing the number of segments will reduce the amount of data that needs to be rendered.
Get rid of any unnecessary bevels. These add considerably to the total number of polygons that make up the objects in your scene.
In the Preview and Export Editor under the General Options, you can set the Detail Level to low.
Setting the slider farther over to Curves will usually result in a slightly smaller file size, but don't expect this one to work miracles.
Experiment with the different Fill Settings. There is no one setting that works best for every situation. Try combining outlines with some of the simpler fill settings to get the greatest amount of detail and the smallest file size. It will often be a compromise on some level.
__________________
mrush
Good luck!
-cubedflash
sukhmeet
05-14 08:37 PM
Thanks Ruben and others,
Yes the salary requirement is ok since i have greater than 60k anyway, what are other requirements as in our company 50% people are on h1b. Is having 50% as h1b with less than 20 employees is a problem now a days from extension point of view.
Thanks again for your reply.
Yes the salary requirement is ok since i have greater than 60k anyway, what are other requirements as in our company 50% people are on h1b. Is having 50% as h1b with less than 20 employees is a problem now a days from extension point of view.
Thanks again for your reply.
No comments:
Post a Comment